Virgin AC Pumps

BearCat Pumps Virgin Asphalt Pumps

Overview

BearCat Pumps' V-Series Pumps (Virgin Asphalt Pumps) are external gear, positive displacement pumps designed specifically for pumping standard asphalt and emulsions. They are entirely heat jacketed and utilize adjustable relief valves for relief in both directions. Bronze, self-lubricating bushings are a standard feature in these asphalt pumps as they increase the useful and predictable life span in the field.

Common applications for the V-series asphalt pumps include:

  • Primary asphalt pump of an Asphalt Distributor
  • Asphalt Plant supply through a Micro Motion® Coriolis (Mass Flow) Meter
  • Asphalt Blend transfer
  • Train Car or Tanker Truck Unloading Pump

Relief Valve

One of the prominent features of the BearCat Pumps V-series asphalt pump is its endplate/relief valve design. The modularity of the plate provides mounting on both ends of the pump and, thus, pressure relief in both directions. Because the forward flow is controlled by one end and the reverse flow by the other, each relief valve can be adjusted independently. Heat tracing offers a critically important benefit at start-up. The V-Series asphalt pump balances heat in relation with that of the main body to insure full function of the relief valve prior to pump rotation, when full of asphalt.

No-Leak Lip Seal

The standard V-Series asphalt pump comes with a high temperature, no-leak, low-maintenance seal design. Supported internally by a roller bearing, the drive shaft runs precise, thus, prolonging seal life.

As an alternative, the Packed Seal is available upon request. Graphite impregnated split ring packing can be specified if needed.

Features of our V series asphalt pumps include:

  • Heat-treated, pulse-dampening helical gears
  • Full hot oil jacketing
  • Dual, built-in, fully heated relief valves (pressure relieving in both directions)
  • No Leak driveshaft seal design
  • Nitride treated shafts
  • Multiple port configurations
  • Flanged ports
  • Can be direct driven inline or belt and pulley (pillow block bearing required for belt and pulley drive)

300V

image of a 300V Virgin AC Pump
300 Pump Flow Rate Chart
300 Pump Power Chart

450V

image of a 450V Virgin AC Pump
450 Pump Flow Rate Chart
450 Pump Power Chart

600V

image of a 600V Virgin AC Pump
600 Pump Flow Rate Chart
600 Pump Power Chart